We've received your request for AS20708 14 (described as Synchro Transmitter), manufactured by Sae International with CAGE code 0U583. This part is registered under NSN 5990-01-305-7228, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 01-305-7228, NCB code 01 (origin: USA), and INC 02073. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your AS20708 14 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-305-7228 Item PartTypeName: SYNCHRO,TRANSMITTER | 5990 | 013057228 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 904971 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0006 INCHES |
| AJWH | SHAFT END PLAY | 0.0010 INCHES NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES NOM. |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| AAVH | SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.3320 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM AND 0.0830 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1867 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 15 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 1.2 WATTS MAXIMUM |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0350 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7770 INCHES MAXIMUM |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.0970 INCHES MINIMUM AND 1.1030 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
| ABKK | FLANGE DIAMETER | 1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| AJST | ROTOR INPUT CURRENT RATING | 85.0 MILLIAMPERES MAXIMUM |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 1402.00 MINIMUM AND 1643.00 MAXIMUM |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 81.40 MINIMUM AND 84.60 MAXIMUM |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 123.00 MINIMUM AND 138.00 MAXIMUM |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 26.50 MINIMUM AND 31.50 MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 32.00 OUTPUT |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.05 INCH-OUNCES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/14 GOVERNMENT SPECIFICATION |
| End Use : 22220 | Marine engines, parts |
|---|---|
| Schedule B : 9014900000 (NAICS 334511) | Parts & accessories for direction finding compasses and other navigational instruments and appliances |
| SITC : 87412 | Parts and accessories of navigational instruments and appliances |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | A - Item does not contain precious metal. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 062820 - Radio/tv transmit/receive sets |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 593 - Motors and parts, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
