Buy AP4-6985-1 Circuit Breaker part by Sensata Technologies Inc

Part Number:  AP4-6985-1
Alternate P/N:  AP469851
Manufacturer:  sensata technologies inc
NIIN:  013030549
Item Name :  circuit breaker
CAGE Code:  81541
INC Code:  00136
Country:  USA
NCB Code:  01

We've received your request for AP4-6985-1 (described as Circuit Breaker), manufactured by Sensata Technologies Inc with CAGE code 81541. This part is registered under NSN 5925-01-303-0549, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-303-0549, NCB code 01 (origin: USA), and INC 00136. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your AP4-6985-1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AP4-6985-1

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part AP4-6985-1, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number AP4-6985-1 with NSN 5925-01-303-0549, 5925013030549

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5925-01-303-0549

Item PartTypeName:

CIRCUIT BREAKER

59250130305490P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
AP4-6985-1523

Characteristics Data of NSN 5925-01-303-0549, 5925013030549

MRCCriteriaCharacteristic
CPRHCIRCUIT PROTECTION TYPEOVERCURRENT ALL LOCATIONS
CPSMINTERNAL TRIP RELEASE CONFIGURATIONSERIES TRIP ALL LOCATIONS
ADATBODY WIDTH2.582 INCHES MAXIMUM
AEFSNONTURN DEVICE DIAMETER0.147 INCHES NOMINAL
BBRGSTORAGE TYPEGENERAL PURPOSE WAREHOUSE
BBRJSPECIAL HANDLING FEATUREMAGNETIC
CPRJTRIP RELEASE METHODMAGNETIC ALL LOCATIONS
CPRQRESET METHODMANUAL
CPRTMANUAL ACTUATOR TYPE AND QUANTITY1 TOGGLE
CTJSUNPACKAGED UNIT WEIGHT7.200 OUNCES NOMINAL
TTQYTERMINAL TYPE AND QUANTITY8 WIRE HOOK
AAQLBODY STYLEMULTIPOLE-SINGLE ACTUATOR TYPE
ADAQBODY LENGTH1.562 INCHES MAXIMUM
AFJNFRAGILITY FACTORMODERATELY RUGGED
AJWXMOUNTING SURFACE TO TERMINAL END DISTANCE1.780 INCHES MAXIMUM
AXHRMOUNTING FACILITY TYPE AND QUANTITY1 THREADED BUSHING W/PANEL SEAL
CMLPTHREAD QUANTITY PER INCH32
CPRRMAIN CONTACT TRIPPING MECHANISM TYPETRIP FREE
CPRWACTUATOR FUNCTIONTRIP-RESET
THSDTHREAD SERIES DESIGNATORUNEF
ABXDBUSHING LENGTH0.380 INCHES MAXIMUM
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH0.875 INCHES NOMINAL
AEBQCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH0.625 INCHES NOMINAL
AEFPNONTURN DEVICE RADIUS0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
AEFQNONTURN DEVICE LENGTH0.099 INCHES MINIMUM AND 0.161 INCHES MAXIMUM
AKPXPOLE QUANTITY4
CPRXACTUATOR POSITION DESIGNATIONBETWEEN POLE TWO AND THREE
CQJXNOMINAL THREAD SIZE0.375 INCHES
CQXFINCLOSURE PROTECTION TYPE FOR WHICH DESIGNEDHERMETICALLY SEALED AND SHOCKPROOF AND VIBRATIONPROOF

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536200040 (NAICS 335313) Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi
SITC : 77252 Automatic circuit breakers for a voltage not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack No qup
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top