Buy 23W6 2122 Resistor Variable W part by Servo Instrument Corporation

Part Number:  23W6 2122
NIIN:  009737855
Item Name :  resistor variable w
CAGE Code:  19176
INC Code:  37408
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 23W6 2122 (described as Resistor Variable W), manufactured by Servo Instrument Corporation with CAGE code 19176. This part is registered under NSN 5905-00-973-7855, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-973-7855, NCB code 00 (origin: USA), and INC 37408. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 23W6 2122 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 23W6 2122

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 23W6 2122, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 23W6 2122 with NSN 5905-00-973-7855, 5905009737855

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-973-7855

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

5905009737855N
CIICHCCESDPMICCriticalityENAC
G
Part NumberISCRNVCRNCCHCCMSDSSADC
100-5482C25

Characteristics Data of NSN 5905-00-973-7855, 5905009737855

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY5
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH3.804 INCHES NOMINAL
ABPMBODY DIAMETER1.312 INCHES NOMINAL
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL
ABXFSHAFT LENGTH0.835 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.375 INCHES NOMINAL
ADAQBODY LENGTH2.969 INCHES NOMINAL
ADAVOVERALL DIAMETER1.688 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEDZSHAFT BEARING TYPESLEEVE
AEEASWITCH TYPEROTARY
AEEDSWITCH VOLTAGE RATING IN VOLTS28.0
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION352.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE1.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE0.75 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 6 OCLOCK
AEFPNONTURN DEVICE RADIUS0.562 INCHES NOMINAL
AEFYSHAFT END PLAY0.005 INCHES
AEFZSHAFT RUNOUT0.002 INCHES
AEGALATERAL RUNOUT0.005 INCHES
AEGBPILOT DIAMETER RUNOUT0.002 INCHES
AEGCSHAFT RADIAL PLAY0.004 INCHES
AEGHSWITCH OPERATING POSITIONSTART OF ROTATION
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING AND STANDARD BUSHING
CBBLFEATURES PROVIDEDSWITCH
CQCCELECTRICAL RESISTANCE PER SECTION12.5 KILOHMS 1ST SECTION AND 11.0 KILOHMS 2ND SECTION AND 1.0 KILOHMS 3RD SECTION AND 11.0 KILOHMS 4TH SECTION AND 6.5 KILOHMS 5TH SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.50 TO 0.50 ALL SECTIONS
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.75 FREE AIR ALL SECTIONS
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS INDEPENDENT LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 ALL SECTIONS
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 ALL SECTIONS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 ALL SECTIONS
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS0.040 AC/DC
PMLCPRECIOUS MATERIAL AND LOCATIONTERMINALS GOLD
PRMTPRECIOUS MATERIALGOLD
TTQYTERMINAL TYPE AND QUANTITY17 TURRET

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC G - Item contains gold.

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top