Buy CAK2-2520-260 Nut Plain Blind Rivet part by Sherex Fastening Solutions Llc

Part Number: CAK2-2520-260

Alternate P/N: CAK22520260

Manufacturer: sherex fastening solutions llc

NSN: 5310-01-652-0053

NIIN: 016520053

Item Name : nut plain blind rivet

CAGE Code: 7EK30

FSC: 5310 Nuts and Washers

INC Code: 01873

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for CAK2-2520-260 (described as Nut Plain Blind Rivet), manufactured by Sherex Fastening Solutions Llc with CAGE code 7EK30. This part is registered under NSN 5310-01-652-0053, classified in FSG 53 Hardware and Abrasives / FSC 5310 Nuts and Washers. Our verification process will confirm traceability through supporting identifiers including NIIN 01-652-0053, NCB code 01 (origin: USA), and INC 01873. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CAK2-2520-260 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CAK2-2520-260

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part CAK2-2520-260, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number CAK2-2520-260 with NSN 5310-01-652-0053, 5310016520053

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-01-652-0053 Item PartTypeName: NUT,PLAIN,BLIND RIVET	5310	016520053		N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
			A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
80034563	5	2	5

Characteristics Data of NSN 5310-01-652-0053, 5310016520053

MRC	Criteria	Characteristic
AAJE	THREAD PITCH DIAMETERS	-0.25 TO 0.35 INCHES
AASK	HEAD STYLE	FLAT
ACVN	NUT LENGTH	0.665 INCHES MINIMUM AND 0.695 INCHES MAXIMUM
FEAT	SPECIAL FEATURES	SMALL FLANGE KNURLED BODY THIN WALL;
MATT	MATERIAL	STEEL COMP 1008 OR STEEL COMP 1010 OVERALL
CQJX	NOMINAL THREAD SIZE	0.25 INCHES
AGGP	DRILLED HOLE DIAMETER	0.2969 INCHES NOMINAL
AASL	HEAD DIAMETER	0.445 INCHES MINIMUM AND 0.465 INCHES MAXIMUM
ALET	HOLE TYPE AND QUANTITY	2 DRILLED
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTM B633 FE/ZN8, TYPE II NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
ADFN	SHANK END TYPE	OPEN
AAJF	THREAD DIRECTION	RIGHT-HAND
AASU	HEAD HEIGHT	0.020 INCHES MINIMUM AND 0.024 INCHES MAXIMUM
ACTD	NUT DIAMETER	0.391 INCHES MINIMUM AND 0.397 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	20
ACTA	NUT STYLE	BLIND RIVET W/SMOOTH ROUND SHANK
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	RIVET NUT
ADEY	NUT GRIP RANGE	-0.165 TO 0.260 INCHES
ADEY	UNABLE TO DECODE	-0.165 TO 0.260 INCHES
BZRR	THREAD SERIES	UNC
SFTT	SURFACE TREATMENT	ZINC OVERALL

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 7318160000 (NAICS 332722)	Nuts of iron or steel
SITC : 69421	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel

Identification

ADPE	Represents items with no adp components
ESD	A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.