We've received your request for 42025-1-33 (described as Catch Flush), manufactured by Telair International Incorporated with CAGE code 32707. This part is registered under NSN 5340-01-006-9291, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 01-006-9291, NCB code 01 (origin: USA), and INC 20262. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 42025-1-33 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-006-9291 Item PartTypeName: CATCH,FLUSH | 5340 | 010069291 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 42025-1-33 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABGL | WIDTH | 1.650 INCHES NOMINAL |
| ABRY | LENGTH | 2.720 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 1.125 INCHES NOMINAL |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 2.190 INCHES NOMINAL |
| CZFS | LEVER OFFSET DISTANCE | 0.140 INCHES NOMINAL |
| CZFT | BOLT OFFSET DISTANCE | 0.400 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | MATL:BUTTON ALUM. ALLOY,BRACKET STEEL,LEVER STEEL,RIVET CRES STEEL,SEAL SYN RUBBER;S/TREATMENT:BUTTON ANODIZED,BRACKET PASS.,LEVER PASS.,RIVET PASS. |
| MATT | MATERIAL | STEEL COMP 302 BOLT |
| MATT | MATERIAL | STEEL COMP 631 SPRING |
| SFTT | SURFACE TREATMENT | PASSIVATE BOLT |
| SFTT | SURFACE TREATMENT | PASSIVATE SPRING |
| ZZZK | SPECIFICATION/STANDARD DATA | 26512-GL510AU MANUFACTURERS SPECIFICATION |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 8302497500 (NAICS 332510) | Other base metal mountings, fittings etc, nesoi |
| SITC : 69919 | Mountings, fittings and similar articles, n.E.S., of base metal; hat racks and pegs, brackets, etc., of base metal; base metal automatic door closures |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 093880 - Catches/latches metal noi |
| SHC: | 5 - Low sensitivity, category iv, aa&e, unclassified |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
