Buy 90-10459-01 Hose Assembly Nonme part by Teleflex Marine Industrial Div

Part Number:  90-10459-01
Alternate P/N:  901045901
NIIN:  014569101
Item Name :  hose assembly nonme
CAGE Code:  40223
INC Code:  20311
Country:  USA
NCB Code:  01
FSG:  47 Pipe Tubing Hose and Fittings

We've received your request for 90-10459-01 (described as Hose Assembly Nonme), manufactured by Teleflex Marine Industrial Div with CAGE code 40223. This part is registered under NSN 4720-01-456-9101, classified in FSG 47 Pipe Tubing Hose and Fittings / FSC 4720 Hose and Tubing Flexible. Our verification process will confirm traceability through supporting identifiers including NIIN 01-456-9101, NCB code 01 (origin: USA), and INC 20311. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 90-10459-01 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 90-10459-01

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 90-10459-01, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 90-10459-01 with NSN 4720-01-456-9101, 4720014569101

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4720-01-456-9101

Item PartTypeName:

HOSE ASSEMBLY,NONMETALLIC

47200145691010N
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
12593030227

Characteristics Data of NSN 4720-01-456-9101, 4720014569101

MRCCriteriaCharacteristic
AAJDTHREAD CLASS1A 2ND END
ABJHTEMP RATING-50.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE
AGAVEND ITEM IDENTIFICATION105MM, M119A1 HOWITZER
AHNCCONNECTION STYLESWIVEL NUT, INVERTED FLARE 1ST END
CQCSLAYER COMPOSITION AND LOCATION1ST LAYER RUBBER IMPREGNATED WOVEN COTTON CORD AND 2ND LAYER RUBBER IMPREGNATED WOVEN COTTON CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
CRXXMEASURING METHOD AND LENGTH19.000 INCHES MINIMUM OVERALL AND 20.000 INCHES MAXIMUM OVERALL
FEATSPECIAL FEATURESTHIS ITEM CONSIST OF: HOSE X COLLAR(QTY.2) X FEMALE INVERTED FLARE INSERT X CAP(QTY.2) X HEAT SHRINK // ASSEMBLE, ATTACH, TEST AND INSPECT PER TFS-140 // NHA: 12591205
MEDAMEDIA FOR WHICH DESIGNEDBRAKE FLUID, NONMINERAL OIL SINGLE RESPONSE
AAJFTHREAD DIRECTIONRIGHT-HAND 1ST END
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 1ST END
THSDTHREAD SERIES DESIGNATORUNF 1ST END
CRZY(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITYNOT INCLUDED
CRWLINSIDE SURFACE CONDITIONSMOOTH
CQBB(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
CQBG(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITYINCLUDED
CQGH(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIALNUT STEEL
ADJM(NON-CORE DATA) INNER CONVEYING TUBE MATERIALRUBBER, SYNTHETIC
CQRBSEAT ANGLE45.0 DEGREES 1ST END 45.0 DEGREES 2ND END
AAJP(NON-CORE DATA) OUTSIDE SURFACE TREATMENTHEAT SHRINK TO COVER ENTIRE ASSEMBLY AND COLLARS
ABKVOUTSIDE DIAMETER0.550 INCHES NOMINAL
ADJSEXTERIOR COLORBLACK
AARXINSIDE DIAMETER0.250 INCHES NOMINAL
CXCYPART NAME ASSIGNED BY CONTROLLING AGENCYDRAWING ITEM NAME: 1/8 IN. DOT BRAKE HOSE ASSEMBLY
CRBL(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIALNIPPLE STEEL
ADLF(NON-CORE DATA) HOSE OR TUBING SPEC/STD DATADOT 571.106 STANDARD NO.106 OR SAE J1401-81343 STANDARD STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CQJXNOMINAL THREAD SIZE0.375 INCHES 1ST END 0.375 INCHES 2ND END
AKUUEND CONNECTION DESIGNSTRAIGHT 1ST END STRAIGHT 2ND END
AAGRCROSS-SECTIONAL SHAPE STYLEROUND
CRJMOUTER COVERING ENVIRONMENTAL PROTECTIONAGE RESISTANT AND WEATHERPROOF AND HYDRAULIC SOLUTION RESISTANT

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL M22gjx-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS B14
Unit of Measure Ea

Freight Information

ACC: B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: W - Rating variable
LTL: W - Rating variable
NMFC: 051140 - Hose: noi tubing
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 794 - Fire fighting hose

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top