Buy MC215 Shaft Assembly,Flexible part by The Okonite Company

Part Number: MC215

Manufacturer: the okonite company

NSN: 1680-00-554-5470

NIIN: 005545470

Item Name : shaft assembly,flexible

CAGE Code: 80063

FSC: 1680 Miscellaneous Aircraft Accessories and Components

Country: USA

NCB Code: 00

FSG: 16 Aircraft Components and Accessories

We've received your request for MC215 (described as Shaft Assembly,Flexible), manufactured by The Okonite Company with CAGE code 80063. This part is registered under NSN 1680-00-554-5470, classified in FSG 16 Aircraft Components and Accessories / FSC 1680 Miscellaneous Aircraft Accessories and Components. Our verification process will confirm traceability through supporting identifiers including NIIN 00-554-5470, NCB code 00 (origin: USA), and INC . Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MC215 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MC215

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MC215, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MC215 with NSN 1680-00-554-5470, 1680005545470

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
1680-00-554-5470 Item PartTypeName: SHAFT ASSEMBLY,FLEXIBLE	1680	005545470		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
MC215	6	1	3

Characteristics Data of NSN 1680-00-554-5470, 1680005545470

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2 BOTH ENDS
AAJF	THREAD DIRECTION	RIGHT-HAND BOTH ENDS
AAUJ	SPLINE MAJOR DIAMETER	0.240 INCHES MINIMUM AND 0.242 INCHES MAXIMUM BOTH ENDS
ABSA	SPLINE QUANTITY	15 BOTH ENDS
ABSC	SPLINE MINOR DIAMETER	0.194 INCHES MINIMUM AND 0.196 INCHES MAXIMUM BOTH ENDS
ADMS	WRENCHING FACILITY OUTSIDE DIAMETER	0.625 INCHES NOMINAL BOTH ENDS
AECT	THREAD DEPTH	0.2425 INCHES MINIMUM AND 0.2585 INCHES MAXIMUM BOTH ENDS
AEDN	TIP LENGTH	0.437 INCHES NOMINAL BOTH ENDS
AGJS	PITCH DIAMETER	0.212 INCHES MINIMUM AND 0.214 INCHES MAXIMUM BOTH ENDS
AJXJ	CORE MATERIAL	STEEL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNS BOTH ENDS
AKMH	CORE DIAMETER	0.145 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
APJC	THREAD LOCATION	INTERNAL BOTH ENDS
APTD	END TYPE	ROUND,INTERNAL SPLINED BOTH ENDS
AWZY	END CONNECTION TYPE	THREADED INTERNAL BOTH ENDS
AXFG	SPLINE PRESSURE ANGLE IN DEG	14.5 BOTH ENDS
AXFH	SPLINE LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM BOTH ENDS
AXYS	SPLINE TYPE	INVOLUTE BOTH ENDS
BDRL	SETSCREW	NOT INCLUDED BOTH ENDS
BJPS	CASING MATERIAL	STEEL
BPPL	WRENCHING FACILITY TYPE	KNURLED SURFACE BOTH ENDS
CFQW	CROSS SECTION SIZE AND LOCATION	0.344 INCHES NOMINAL DIAMETER BOTH ENDS
CFRM	TORSIONAL DEFLECTION RATING	7 DEG FT-LB IN. TORSIONAL DEFLECTION RATING IN WINDING AND UNWINDING DIRECTION
CFRN	CASING SURFACE TREATMENT	ZINC COATED
CFRQ	CASING OUTSIDE DIAMETER	0.330 INCHES NOMINAL
CFRT	SWIVEL END	NOT PROVIDED BOTH ENDS
CFRW	END OVERALL DIAMETER	0.625 INCHES NOMINAL BOTH ENDS
CFRY	LUBRICATION FITTING	NOT PROVIDED BOTH ENDS
CFSB	CORE ROTATION DIRECTION	CLOCKWISE
CFSL	CORE REMOVABILITY	REMOVABLE
ZZZT	NONDEFINITIVE SPEC/STD DATA	AMC-215 TYPE
ZZZV	FSC APPLICATION DATA	RADIO SET,RADIO COMMUNICATIONS EQUIPMENT,AIRBORNE