Buy 4WS6M12-S22 Winch Drum Power Op part by Thern Inc

Part Number:  4WS6M12-S22
Alternate P/N:  4WS6M12S22
Manufacturer:  thern inc
NIIN:  014635229
Item Name :  winch drum power op
CAGE Code:  12437
INC Code:  04575
Country:  USA
NCB Code:  01

We've received your request for 4WS6M12-S22 (described as Winch Drum Power Op), manufactured by Thern Inc with CAGE code 12437. This part is registered under NSN 3950-01-463-5229, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-463-5229, NCB code 01 (origin: USA), and INC 04575. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 4WS6M12-S22 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4WS6M12-S22

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 4WS6M12-S22, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 3950-01-463-5229, 3950014635229

MRCCriteriaCharacteristic
ATYGPOWER REQUIREMENT RATING5.00 HORSEPOWER
FEATSPECIAL FEATURESWORM/SPUR GEAR DRIVE;460-3-60 CYCLE INPUT VOLTAGE;3 HP TEFC BRAKE MOTOR WITH IEEE 45 MARINE DUTY RATING;BRAKE IS DUST TIGHT WATER PROOF;ELECTRA GEAR REDUCER;TOTAL REDUCTION RATIO W/SPUR GEAR 228.50;LOAD RATING 3,500 LBS 1ST LAYER,3000 MID DRUM, 2600 LBS FULL DRUM;NOMINAL LINE SPEED 19 FPM 1ST LAYER,22 FPM MID DRUM,25 FPM FULL DRUM;GROOVE FOR .5 IN DIA CABLE DEVELOPS APPROX 1.75 GROOVES PER IN OF DRUM;ONE REVOLUTION OF DRUM WRAPS APPROX 2.4 FT OF CABLE;ROLLER EXERTS PRESSURE ON CABLE AS IT WINDS ON/OFF DRUM AIDS IN KEEPING CABLE FROM JUMPING GROOVES WITH NO LOAD ON CABLE;ROLLER RECEIVES FORCE FROM GAS SPRINGS
AKNAINCLOSURE TYPEPARTIALLY INCLOSED
ACDCCURRENT TYPEAC
AKPSDUTY CYCLEINTERMITTENT
FAAZPHASETHREE
ELECVOLTAGE IN VOLTS460.0
ATWDDRUM FLANGE TO FLANGE DISTANCE AND LOCATION12.000 INCHES NOMINAL FIRST DRUM
ATWEDRUM DIAMETER AND LOCATION9.000 INCHES NOMINAL FIRST DRUM
AGAVEND ITEM IDENTIFICATIONWINCH;W/S NIMITZ CLASS CVN
ATYHDRUM SURFACE DESIGNGROOVED
AKDJPRIME MOVER TYPEELECTRIC MOTOR
ADZCENVIRONMENTAL PROTECTIONANY ACCEPTABLE
BFMFCOOLING METHODANY ACCEPTABLE
AAXHPRIME MOVER QUANTITY1
FREQFREQUENCY IN HERTZ60.0
SUPPSUPPLEMENTARY FEATURESMAGNETIC REVERSING STARTER MOUNTED AND WIRED TO WINCH;STARTER INCLUDES CONTACTS FOR FORWARD/REVERSING MOTOR,THERMAL OVERLOADS W/ ADJUSTABLE SETTING FM 4.00-6.00 AMPS,CONTROL POWER TRANSFORMER TO REDUCE 460 V PRIMARY TO 120V AT OP STATION;ELECTRONIC OVERLOAD SENSOR INCLUDED WHICH CUTS CURRENT TO MOTOR WHEN CURRENT EXCEEDS PRESET MAX;SWITCH IS CURRENT ACTIVATED,ADJUSTABLE,RESETTING BY REVERSING DIRECTION OF OP;SENSOR ACTIVE IN FORWARD ONLY;WILL NOT SENSE REDUCED CURRENT;STARTER SOES NOT INCLUDE PLUGS TO POWER SOURCE;OP STATION IS NEMA 4 PUSHBUTTON STATION ON 12 PT PENDANT WITH UP/DOWN LEGENDS
APHEOPERATION METHODPOWERED
ATWFDRUM FLANGE DIAMETER AND LOCATION14.000 INCHES NOMINAL FIRST DRUM

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL 3b-----
Quantity per pack 1
Repariability When repair is beyond lower level maintenance capability, evacuate the item to depot. disposal is not authorized below wholesale level.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 116440 - Capstans/winches/windlasses
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 885 - Vehicles, mhe, road construction, repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top