Buy MS24693-C5 Screw Machine part by Tower Fasteners Co Inc

Part Number: MS24693-C5

Alternate P/N: MS24693C5

Manufacturer: tower fasteners co inc

NSN: 5305-01-606-0793

NIIN: 016060793

Item Name : screw machine

CAGE Code: 0MV24

FSC: 5305 Screws

INC Code: 06657

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for MS24693-C5 (described as Screw Machine), manufactured by Tower Fasteners Co Inc with CAGE code 0MV24. This part is registered under NSN 5305-01-606-0793, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 01-606-0793, NCB code 01 (origin: USA), and INC 06657. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS24693-C5 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS24693-C5

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS24693-C5, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS24693-C5 with NSN 5305-01-606-0793, 5305016060793

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-606-0793 Item PartTypeName: SCREW,MACHINE	5305	016060793	0	N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
11538-24693-C5	5	2	3

Characteristics Data of NSN 5305-01-606-0793, 5305016060793

MRC	Criteria	Characteristic
ABQZ	INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
AASB	FASTENER LENGTH	0.1120 INCHES NOMINAL
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.437 INCHES NOMINAL
AASK	HEAD STYLE	FLAT COUNTERSUNK
AHYM	NOMINAL THREAD DIAMETER	0.1120 INCHES
CMLP	THREAD QUANTITY PER INCH	40
CYAU	SCREW MATERIAL	STEEL CORROSION RESISTING
THSD	THREAD SERIES DESIGNATOR	UNC
CRSQ	COUNTERSINK ANGLE	0.100 DEGREES NOMINAL
AASL	HEAD DIAMETER	0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM

Schedule B & Trade

End Use : 12110	Iron and steel products, other
Schedule B : 7318152000 (NAICS 332722)	Bolts and bolts and their nuts or washers exported in the same shipment
SITC : 69421	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD	A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	133300 - Machinery/machines noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72E - Engineer and material handling equipment, test/tool sets and equipment