Buy RBB-185PF-7 (201 Connector Body Rece part by Tri Star Electronics International

Part Number:  RBB-185PF-7 (201
Alternate P/N:  RBB185PF7(201
NIIN:  012100116
Item Name :  connector body rece
CAGE Code:  55104
INC Code:  61925
Country:  USA
NCB Code:  01

We've received your request for RBB-185PF-7 (201 (described as Connector Body Rece), manufactured by Tri Star Electronics International with CAGE code 55104. This part is registered under NSN 5935-01-210-0116, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-210-0116, NCB code 01 (origin: USA), and INC 61925. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your RBB-185PF-7 (201 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RBB-185PF-7 (201

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part RBB-185PF-7 (201, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number RBB-185PF-7 (201 with NSN 5935-01-210-0116, 5935012100116

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-210-0116

Item PartTypeName:

CONNECTOR BODY,RECEPTACLE,ELECTR

59350121001160PA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
784407-2521

Characteristics Data of NSN 5935-01-210-0116, 5935012100116

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2B AND 2A
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLESTRAIGHT SHAPE
ABHPOVERALL LENGTH1.385 INCHES MAXIMUM
ABKWOVERALL HEIGHT1.146 INCHES MINIMUM AND 1.170 INCHES MAXIMUM
ABMKOVERALL WIDTH4.300 INCHES MINIMUM AND 4.334 INCHES MAXIMUM
ADZCENVIRONMENTAL PROTECTIONSALT SPRAY PROOF AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT AND MOISTURE RESISTANT AND SOLVENT RESISTANT AND FUEL RESISTANT
AEBWCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.558 INCHES MINIMUM AND 0.566 INCHES MAXIMUM
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH3.870 INCHES MINIMUM AND 3.880 INCHES MAXIMUM
AFQKDISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.519 INCHES MINIMUM AND 0.534 INCHES MAXIMUM
AFQRTHREADED DEVICE TYPEMOUNTING HOLE
AFQWMATING END QUANTITY12
AFQXCONTACT POSITION ARRANGEMENT STYLEG185 SINGLE MATING END
AFRNPOLARIZATION METHODMATING END AND GUIDE PIN/SOCKET
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODFRICTION AND LATCH
AWTNOPERATING TEMP RATING-54.0 DEG CELSIUS MINIMUM AND 200.0 DEG CELSIUS MAXIMUM
CMLPTHREAD QUANTITY PER INCH32 AND 40
CQJXNOMINAL THREAD SIZE0.138 INCHES
CQZGINSERT MATERIALPLASTIC AND GLASS SINGLE MATING END
CSPTSHELL MATERIALALUMINUM ALLOY 380.0
CSWMSHELL SURFACE TREATMENTNICKEL AND COPPER ALLOY
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-26074,CL 3,GRADE A MIL SPEC SINGLE TREATMENT RESPONSE
CTHHSHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-591D FED SPEC SINGLE MATERIAL RESPONSE
CTKLINSERT MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-14F,TYPE MFH MIL SPEC ALL MATERIAL RESPONSES SINGLE MATING END
THSDTHREAD SERIES DESIGNATORUNC

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top