Buy DM5616-37-2PS Adapter Connector part by Tyco Electronics Corporation

Part Number:  DM5616-37-2PS
Alternate P/N:  DM5616372PS
NIIN:  009306146
Item Name :  adapter connector
CAGE Code:  11139
INC Code:  15091
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for DM5616-37-2PS (described as Adapter Connector), manufactured by Tyco Electronics Corporation with CAGE code 11139. This part is registered under NSN 5935-00-930-6146, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-930-6146, NCB code 00 (origin: USA), and INC 15091. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your DM5616-37-2PS requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DM5616-37-2PS

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part DM5616-37-2PS, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number DM5616-37-2PS with NSN 5935-00-930-6146, 5935009306146

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-930-6146

Item PartTypeName:

ADAPTER,CONNECTOR

59350093061460PA
CIICHCCESDPMICCriticalityENAC
UAC
Part NumberISCRNVCRNCCHCCMSDSSADC
DM5316-37-2PS223

Characteristics Data of NSN 5935-00-930-6146, 5935009306146

MRCCriteriaCharacteristic
AAQLBODY STYLESTRAIGHT SHAPE W/FLANGE
ABKWOVERALL HEIGHT1.438 INCHES NOMINAL
ABMKOVERALL WIDTH1.438 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND MOISTURE RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.094 INCHES NOMINAL
AEBWCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT1.188 INCHES NOMINAL
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.188 INCHES NOMINAL
AFQKDISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.500 INCHES NOMINAL
AFQWMATING END QUANTITY2
AFQXCONTACT POSITION ARRANGEMENT STYLE37-2P ALL MATING ENDS
AFQZCONTACT REMOVABILITYNONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
AFRNPOLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
AFRPINSERT POSITION IN DEG0.0
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODSPRING FRICTION
CQTZCONTACT MATERIALCOPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD ALL MATING ENDS SINGLE CONTACT GROUPING
CQZGINSERT MATERIALRUBBER ALL MATING ENDS
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CSPTSHELL MATERIALALUMINUM ALLOY
CSWMSHELL SURFACE TREATMENTSILVER
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE
CXCGINCLUDED CONTACT QUANTITY24 1ST MATING END SINGLE CONTACT GROUPING
CXCGINCLUDED CONTACT QUANTITY24 2ND MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEROUND PIN 1ST MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEROUND SOCKET 2ND MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD AND SHELL SURFACE SILVER
PMWTPRECIOUS MATERIAL AND WEIGHT0.048 GOLD GRAINS,TROY AND 0.100 SILVER GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD AND SILVER

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8548900100 (NAICS 335999) Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
SITC : 77813 Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, etc; electric parts of mach or apps, nes

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top