Buy W93 X112 40 Circuit Breaker part by Tyco Electronics Corporation

Part Number:  W93 X112 40
NIIN:  014785965
Item Name :  circuit breaker
CAGE Code:  77342
INC Code:  00136
Country:  USA
NCB Code:  01

We've received your request for W93 X112 40 (described as Circuit Breaker), manufactured by Tyco Electronics Corporation with CAGE code 77342. This part is registered under NSN 5925-01-478-5965, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-478-5965, NCB code 01 (origin: USA), and INC 00136. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your W93 X112 40 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for W93 X112 40

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part W93 X112 40, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number W93 X112 40 with NSN 5925-01-478-5965, 5925014785965

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5925-01-478-5965

Item PartTypeName:

CIRCUIT BREAKER

59250147859650PA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
56F840525

Characteristics Data of NSN 5925-01-478-5965, 5925014785965

MRCCriteriaCharacteristic
THSDTHREAD SERIES DESIGNATORUNC
ADTVCASE MATERIALPLASTIC
CPRRMAIN CONTACT TRIPPING MECHANISM TYPETRIP FREE
CPRLTRIP RELEASE CHARACTERISTICTIME DELAY ALL LOCATIONS
AJECBOSS HEIGHT0.140 INCHES NOMINAL
CPRFOPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS277.0 AC ALL LOCATIONS
AXHRMOUNTING FACILITY TYPE AND QUANTITY6 THREADED HOLE
AAQLBODY STYLEMULTIPOLE-MULTIPLE ACTUATOR TYPE
AKPXPOLE QUANTITY3
CPRHCIRCUIT PROTECTION TYPEOVERCURRENT ALL LOCATIONS
CPRTMANUAL ACTUATOR TYPE AND QUANTITY3 TOGGLE
CPRYEXTERNAL ACTUATOR LINKAGE ARRANGEMENTONE, TWO, AND THREE LINKED
CQWNTRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT2.000 MINIMUM AT 200 PCT ALL LOCATIONS AND 20.000 MAXIMUM AT 200 PCT ALL LOCATIONS
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.062 INCHES NOMINAL
CPRNULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT125.0 ALL LOCATIONS
CPRQRESET METHODMANUAL
FEATSPECIAL FEATURESNHAUPLINK FILTER
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.750 INCHES NOMINAL
CPRJTRIP RELEASE METHODMAGNETIC ALL LOCATIONS
ADATBODY WIDTH2.250 INCHES NOMINAL
CPLMMAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE40.0 AMPERES AC ALL LOCATIONS
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH1.938 INCHES NOMINAL
AJWXMOUNTING SURFACE TO TERMINAL END DISTANCE2.630 INCHES NOMINAL
CPRGMAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS1000.0 AC ALL LOCATIONS
CPRWACTUATOR FUNCTIONTRIP-RESET
CPRXACTUATOR POSITION DESIGNATIONAT POLE ONE
CPSMINTERNAL TRIP RELEASE CONFIGURATIONSERIES TRIP ALL LOCATIONS
TTQYTERMINAL TYPE AND QUANTITY6 THREADED STUD
AEBQCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH0.750 INCHES NOMINAL
FREQFREQUENCY IN HERTZ60.0 ALL LOCATIONS
ADAQBODY LENGTH2.250 INCHES NOMINAL
CQJXNOMINAL THREAD SIZE0.138 INCHES

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536200040 (NAICS 335313) Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi
SITC : 77252 Automatic circuit breakers for a voltage not exceeding 1, 000 volts

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9su-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top