We've received your request for 10231685 (described as Clamp Block Section), manufactured by U S Army Aviation And Missile with CAGE code 18876. This part is registered under NSN 5340-00-104-8887, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-104-8887, NCB code 00 (origin: USA), and INC 39404. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 10231685 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-104-8887 Item PartTypeName: CLAMP,BLOCK,SECTION | 5340 | 001048887 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10231685 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 7.4900 INCHES MINIMUM AND 7.5500 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.6250 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.2570 INCHES MINIMUM AND 0.2640 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.3120 INCHES NOMINAL |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 1.2700 INCHES NOMINAL |
| AXPE | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES | 2.5400 INCHES NOMINAL |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| BYGG | BLOCK HEIGHT | 1.0100 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM |
| CWTD | CLAMPING HOLE QUANTITY | 6 |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 1.2200 INCHES NOMINAL |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.5850 INCHES NOMINAL |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.2700 INCHES NOMINAL |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 2.5400 INCHES NOMINAL |
| CWYH | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | 3.8100 INCHES NOMINAL |
| CWYM | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES | 5.0800 INCHES NOMINAL |
| CWYS | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES | 6.3500 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | THE ITEM IS MADE FROM PLASTIC EPOXY AND GLASS FIBER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-18177 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 095190 - Hardware, noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
