Buy 10555860 Retainer Helical Co part by Us Army Ardec Rdecom

Part Number: 10555860

Manufacturer: us army ardec rdecom

NSN: 5340-00-228-1631

NIIN: 002281631

Item Name : retainer helical co

CAGE Code: 19200

FSC: 5340 Hardware Commercial

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 10555860 (described as Retainer Helical Co), manufactured by Us Army Ardec Rdecom with CAGE code 19200. This part is registered under NSN 5340-00-228-1631, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 00-228-1631, NCB code 00 (origin: USA), and INC . Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 10555860 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 10555860

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 10555860, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 10555860 with NSN 5340-00-228-1631, 5340002281631

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-00-228-1631 Item PartTypeName: RETAINER,HELICAL COMPRESSION SPR	5340	002281631	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10555860	6	2	3

Characteristics Data of NSN 5340-00-228-1631, 5340002281631

MRC	Criteria	Characteristic
AASG	CASEHARDENING INDICATOR	NOT CASEHARDENED
ABKK	FLANGE DIAMETER	1.625 INCHES NOMINAL
ABKU	FLANGE THICKNESS	0.250 INCHES NOMINAL
ABKW	OVERALL HEIGHT	1.100 INCHES MINIMUM AND 1.110 INCHES MAXIMUM
ADAR	BODY OUTSIDE DIAMETER	1.376 INCHES MINIMUM AND 1.377 INCHES MAXIMUM
ADAS	BODY INSIDE DIAMETER	0.670 INCHES MINIMUM AND 0.680 INCHES MAXIMUM
BWRC	END HOLE DIAMETER	0.500 INCHES NOMINAL
CDKF	LIP THICKNESS	0.095 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
FEAT	SPECIAL FEATURES	EXTERNAL THREAD 1.625 IN.-32UNS-2A,0.250 IN. THREAD LG,ON FLANGE END. COUNTERBORE 1.187 IN. DIA,0.562 IN. DEEP ON END OPPOSITE FLANGE END. DRILLED FACE DRIVE TYPE.
MATT	MATERIAL	STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763,CLASS 303,COND A FED SPEC 1ST MATERIAL RESPONSE AND QQ-S-763,CLASS 303SE,COND A FED SPEC 2ND MATERIAL RESPONSE AND QQ-S-763,CLASS 304,COND A FED SPEC 3RD MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	PASSIVATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
ZZZV	FSC APPLICATION DATA	MOUNT,TELESCOPE M137