We've received your request for PD07CBSSSGBEC32 (described as Resistance Standard), manufactured by Warner Robins Air Logistics Center with CAGE code 98752. This part is registered under NSN 6625-01-521-8463, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-521-8463, NCB code 01 (origin: USA), and INC 04897. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your PD07CBSSSGBEC32 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | SPECIAL FEATURES | POWER 120 VAC +/- 10%, 60HZ +/- 3%; WEIGHT 300 LBS.; RACK IS REQUIRED FOR THIS SYSTEM; OPERATING TEMP. 22.8DEGREES C, +/- 3.3 DEGREES C; COMPLETE SET OF INTERFACE CABLES INCLUDED; 200 FEET OF SHIELDED SOILD COPPER WIRE SUITABLE FOR MAKING STANDARD 4 WIRE, LOW NOISE, LOW THERMAL, RESISTANCE MEASUREMENTS; PROCESS CONTROLLER SHALL BE A MINIMUM OF 200MHZ INTEL PENTIUM, 32MB MEMORY, 1GB HARD DRIVE AND 17"" MONITOR;COMPLIANCE VOLTAGE +/- 30 VOLTS; TOTAL MEASUREMENT/UNCERTAINITY, RESISTANCE RANGE 0.1 TO 100M, UNCERTAINITY <1 TO <25, TEST CURRENT RANGE 10MICROAMP TO 150 MILLI-AMP CONTINUOUSLY VARIABLE |
| ALFK | CASE | NOT PROVIDED |
| ABMK | OVERALL WIDTH | 36.000 INCHES NOMINAL |
| BDHN | TERMINAL LOCATION CONFIGURATION | REAR PANEL |
| ABHP | OVERALL LENGTH | 72.000 INCHES NOMINAL |
| AAPP | ELECTRICAL RESISTANCE | 100.0 MEGOHMS |
| AARA | TERMINAL QUANTITY | 2 AND 4 |
| End Use : 21160 | Measuring, testing, control instruments |
|---|---|
| Schedule B : 9030908030 (NAICS 334515) | Parts and accessories of articles of schedule b subheading 9030.39 |
| SITC : 87479 | Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | W |
|---|---|
| Classification Control | U |
| MGMT_CTL | --yrh-n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Flz |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | P - 77.5 |
| LTL: | W - Rating variable |
| NMFC: | 061700 - Elec appliances/instruments noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | 3 - Electrostatic sensitive device (esd) |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
