We've received your request for PD08WRGBGBEB35 (described as Tester Pyrometer An), manufactured by Warner Robins Air Logistics Center with CAGE code 98752. This part is registered under NSN 6685-01-570-5253, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-570-5253, NCB code 01 (origin: USA), and INC 07344. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your PD08WRGBGBEB35 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| MRC | Criteria | Characteristic |
|---|---|---|
| AGAV | III END ITEM IDENTIFICATION | GROUND SUPPORT EQUIPMENT |
| FEAT | SPECIAL FEATURES | SHALL BE CAPABLE OF CONNECTING TOAND TESTING MOVEMENT THERMO-COUPLES; METER-MOVEMENT RESISTANCE TEMPERATURE DETECTORS (RTDS); SERVO THERMO-COUPLES ;AND COMMERCIAL THERMO-COUPLES TYPE K/T/J AND TF-30, CASE SHALL BE NO MORE THAN 20 INCHES LONG, 15 INCHES WIDE, AND 15 INCHES HIGH, CASE WILL HAVE A HANDLE ATTACHED AND A LOCKINGMECHANISM P ROVIDED, WEIGHT SHALL BE NO MORE THAN 35 POUNDS; INTERFACE SHALL BE PROVIDEDTHAT WILL DISPLAY VALUES BEING MEASURED OR SOURCED WHILE OPERATING BETWEEN 50 AND 100 DEGREES FARENHEIT, TEMPERATURE CALIBRATOR SHALL HAVE AN ON/OFF POWER SWITCH; BATTERY CHARGE INDICATOR; SOURCE/MEASURE SWITCH; OUTPUT VOLTAGE TUNING ABILITY FROM 0-35VOLTS DOWN TO .5MV OF THE DESIRED OUTPUT; MODE SELECT CAPABILITY; ABILITY TO TEST SINGLE OR DOUBLE RTD INDICATORS; ABILITY TO SOURCE 22.5 OR 28.5 VOLTS PLUS OR MINUS .5MV; ABILITY TO SIMULATE RTD AND SYNCHRO INDICATOR VOLTAGE RANGES, WILL INCLUDE 115/230VAC AT 60HZ POWER CABLE |
| End Use : 21160 | Measuring, testing, control instruments |
|---|---|
| Schedule B : 9033000000 (NAICS 334513) | Parts and accessories (not specified or included elsewhere in this chapter) for machines, appliances, instruments or apparatus of chapter 90 |
| SITC : 87490 | Parts and accessories for machines, appliances, instruments and apparatus, n.E.S., measuring, checking, analysing or controlling, n.E.S. |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| ESD | A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | W |
|---|---|
| Classification Control | U |
| MGMT_CTL | --yrn-e |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Flz |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | U - 50.0 |
| LTL: | F - 150.0 |
| NMFC: | 058240 - Recording devices gauges/meters noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72E - Engineer and material handling equipment, test/tool sets and equipment |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
